MS420-54F 200MS160 (200MS) Process Pumps

EBARA MS420 200MS160 horizontal multistage pump, 200 caliber, weight 330 kg, this multistage pump has always had a vortex impeller, this MS type pump adopts a unique double helix structure, even when the water volume is small, there will be no noise, and it can operate safely.EBARA MS420 200MS160 horizontal multistage pump adopts a double vortex method without guide vanes, with a large discharge range and high efficiency; simple structure, durable and no noise.

In the detailed model name, MS420 indicates the model, 4 indicates the 4-stage impeller code, 5 indicates the frequency is 50hz, 160 indicates the motor power is 160 kW, and 200 indicates the outlet diameter.

As part of EMAC, PumpMac offers a wide range of premium pump drive power pack options, WPT PTO, Advance gearboxes and pump heads, and custom water pump packs. We also have a set of NFPA20 standard engine power pack accessories, including intake shutoff valves, DCcontactors, engine control panels, jacket water heaters, etc.

We provide full life cycle services to all our customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from troubleshooting to overhaul technical support.

Advantages of MS420-54F 200MS160 (200MS) Process Pumps

• The water transport pump has a wide performance range and good efficiency. Because it is a double helix form, the structure is simple, the performance range is large, the efficiency is good, and it is also economical and practical.

• The structure is simple, the volume is small and the quality is light, and it is easy to disassemble and inspect.

• Because there is no guide impeller, the structure is simple, the appearance is small, the quality is light, and it is easy to disassemble and inspect.

• It can be used for high-level suction. The entrance of the impeller adopts a unique design, which can be used even for high-level suction.

• The thrust balance method is very reasonable because there is a double helix setting in the vortex chamber, and the water flow in the right-angle section of the shaft is symmetrical. No matter what the water volume is, the thrust in the direction of the rotating part’s running radius is balanced.

• The thrust in the axial direction is the balance disc, and the degree of wear of the folded surface of the disc is as indicated by the hook at the top of the bearing installed on the side of the suction pipe sleeve.

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.